Skip to content
Bits&Chips
×
×
About
Memberships
Advertising
Magazines
Videos
Contact

Log in

Background

“The best solution is often found at the intersection of different disciplines”

29 October 2026
Marleen Dolman
Reading time: 4 minutes

In high-tech systems development, a decision made within one discipline can have consequences throughout the entire system. Electronics architect Newton Fonseca encounters this throughout his work at VDL ETG Technology & Development. He found the same system-level perspective running through three High Tech Institute courses, from broad mechatronic design to the more specialized field of actuation.

VDL ETG Technology & Development (VDL ETG T&D) is often asked to develop machines for which no proven design exists yet. Customers may arrive with requirements close to the limits of what’s feasible, while the resulting system must eventually be validated, integrated and produced in larger numbers.

Choices made within one discipline can create problems elsewhere. The electronics may affect the mechanical design, while the selected actuator can introduce heat or complicate the control system. Engineers must understand these interactions early enough to prevent a local solution from becoming a problem for the system as a whole.

Newton Fonseca, electronics architect at VDL ETG T&D has been working at the intersection of these disciplines for the last four years. Originally from Brazil, he completed his PhD in Brazil and France before moving to the Netherlands.

“As an electronics architect, I bridge the different branches that stem from electronics: electromechanical engineering, electronic design and PCB design,” Fonseca explains. His work takes him through different stages of development, from defining a new system and building a proof of concept to solving integration problems and improving machines already in the field.

Broad perspective

Working at different stages of development has taught Fonseca to think ahead: “A decision made while defining a system or building a proof of concept may cause difficulties much later, during integration, validation or production. So, in the design stage, you already need to think about this.” That requires an understanding of more than just the field of electronics.

Although he already had a strong theoretical background in systems engineering from university, Fonseca wanted a more practical approach to developing complex mechatronic systems. In 2024, he followed “Mechatronics system design” parts 1 and 2 at High Tech Institute. The courses used examples from engineering projects to show how different disciplines interact and how choices can be assessed at the system level.

For Fonseca, that broad perspective was the main benefit of the courses. He doesn’t need to take over the work of a mechanical, thermal or control specialist, but he does need to recognize when a decision affects their part of the system. That makes it easier to raise the right questions and discuss possible solutions across disciplines.

System-level decision

Where “Mechatronics system design” gave Fonseca a broad view of how the different disciplines within a complex system interact, his expertise lies in power electronics and control. “Actuation and power electronics” at High Tech Institute was a logical choice. He already knew trainer Adrian Rankers from “Mechatronics system design” and had been pleased with the way he combined technical depth with practical examples.

“Within VDL ETG T&D, we design actuators for high-performance systems, where the requirements can be very tight,” Fonseca explains. “You really need to understand the implications of the choices you make.” The “Actuation and power electronics” course examined those choices through actuator specifications, different actuation principles, power electronics and control theory.

A motor converts electrical energy into mechanical movement, but it’s only one part of an actuator. Engineers must first determine which actuator topology best suits the application. Depending on the required movement, force and precision, that could be a conventional motor or a different principle, such as a piezo actuator. Each option has its own limitations and can be optimized in different ways.

An actuator may generate heat, place new demands on the mechanical construction or make the control loop more difficult to optimize. “When you design an actuator, you have to keep an eye on how your decisions will affect the mechanical and thermal solutions,” says Fonseca. So, although “Actuation and power electronics” focused on one specific part of design, actuator selection was still approached as a system-level decision.

System architecting

All three courses gave Fonseca more background for discussing design choices with experts from other fields and for recognizing when their input is needed. VDL ETG closely monitors these developments and empowers its employees to grow. “I haven’t locked anything in yet, but the systems architecting training caught my attention,” Fonseca says. “That training would be another step toward understanding the complete development process, from the first definition of a system to integration, production and improvements in the field.”

Top image credit: VDL ETG. This article was written in close collaboration with High Tech Institute.

Related content

Outsourcing wafer handler to VDL ETG fails, ASML takes back full control

Mission Impossible

Top jobs
Your vacancy here?
View the possibilities
in the media kit
Events
Courses
Headlines
  • Ukrainian Oko Camera plans thermal-camera production in the Netherlands

    12 November 2026
  • Quix-led consortium secures funding for 100-plus-qubit photonic technology

    12 November 2026
  • Promexx and Verum partner for Axiom adoption

    11 November 2026
  • Nexperia CEO keeps door open to reunification with Chinese operations

    11 November 2026
  • Vertical Compute and Imec take memory-on-logic design to 16 nm

    10 November 2026
  • Imec lays groundwork for open-access silicon interposer design kit

    10 November 2026
  • Dutch government commits €200M to European scale-up fund

    10 November 2026
  • Delmic hunts for crystal defects in chip materials

    10 November 2026
  • Axelera AI co-founds European association for fabless chipmakers

    9 November 2026
  • Terafab targets 1M wafers per months in 2032

    9 November 2026
  • Four Dutch-Taiwanese projects target scalable photonics

    5 November 2026
  • EU mobilizes €525M to boost chip design

    5 November 2026
  • TUE researchers secure €950K for greener atomic layer etching

    4 November 2026
  • Imec spin-off Noak raises €5M to scale tandem solar technology

    4 November 2026
  • Nexperia sues Wingtech and founder Zhang for damages

    4 November 2026
  • ICT discontinues Improve

    3 November 2026
  • Marvell to acquire Lumentum in push for optical AI connectivity

    3 November 2026
  • Hardt Hyperloop secures funding for restart after bankruptcy

    3 November 2026
  • Imec partners with Belgian Defense for military technology development

    2 November 2026
  • Demcon targets photonics assembly bottleneck with laser-written connections

    2 November 2026
Bits&Chips logo

Bits&Chips strengthens the high tech ecosystem in the Netherlands and Belgium and makes it healthier by supplying independent knowledge and information.

Bits&Chips focuses on news and trends in embedded systems, electronics, mechatronics and semiconductors. Our coverage revolves around the influence of technology.

Advertising
Subscribe
Events
Contact
Follow us on
High-Tech Systems Magazine (Dutch)
(c) Techwatch bv. All rights reserved. Techwatch reserves the rights to all information on this website (texts, images, videos, sounds), unless otherwise stated.
  • About
  • Memberships
  • Advertising
  • Videos
  • Contact
  • Search
Privacy settings

Bits&Chips uses technologies such as functional and analytical cookies to improve the user experience of the website. By consenting to the use of these technologies, we may capture (personal) data, unique identifiers, device and browser data, IP addresses, location data and browsing behavior. Want to know more about how we use your data? Please read our privacy statement.

 

Give permission or set your own preferences

Functional Always active
Functional cookies are necessary for the website to function properly. It is therefore not possible to reject or disable them.
Voorkeuren
De technische opslag of toegang is noodzakelijk voor het legitieme doel voorkeuren op te slaan die niet door de abonnee of gebruiker zijn aangevraagd.
Statistics
Analytical cookies are used to store statistical data. This data is stored and analyzed anonymously to map the use of the website. De technische opslag of toegang die uitsluitend wordt gebruikt voor anonieme statistische doeleinden. Zonder dagvaarding, vrijwillige naleving door je Internet Service Provider, of aanvullende gegevens van een derde partij, kan informatie die alleen voor dit doel wordt opgeslagen of opgehaald gewoonlijk niet worden gebruikt om je te identificeren.
Marketing
Technical storage or access is necessary to create user profiles for sending advertising or to track the user on a site or across sites for similar marketing purposes.
  • Manage options
  • Manage services
  • Manage {vendor_count} vendors
  • Read more about these purposes
View preferences
  • {title}
  • {title}
  • {title}